Skip to content
Request a Quote
Menu
Placeholder for a photo (BH-P031-S01-I01)

The Team Behind Your Project

Behind each Bohui quotation and order are the people who review your drawing, make the parts and check them before they ship.

Jane is your contact throughout, and she brings in engineering, production and quality as your project needs them. This page explains what each group does, how your project passes between them and how to reach the right person without repeating your question.

Your Contact

Every project starts with one contact.

Jane, Your Contact at Bohui

Jane is your point of contact from the first enquiry to delivery and any repeat order. You send your files, questions and decisions to her, and she coordinates the engineering, quality and production work on your enquiry and order.

One contact helps keep the drawing revision, the agreed requirements and the open questions in one conversation, rather than spread across departments. If a buyer and an engineer on your side both follow the project, copy both on your messages so each answer reaches the person who needs it.

Enquiries and quotations

Jane receives your files, asks the questions needed to quote and sends you the quotation.

Technical questions

She passes questions from engineering to you, and your answers back, with the part number and revision they concern.

Order progress

She keeps you informed on samples, production and shipping, and on any decisions waiting for you.

After delivery

She is your first contact for a repeat order, a design change or a concern about delivered parts.

Placeholder for a photo (BH-P031-S02-I01)

Engineering

Your drawing usually goes to engineering first.

Engineering Reviews Your Drawing

Bohui's engineering team reviews the drawing or model behind your enquiry and connects it to a manufacturing route. The aim is to raise questions while they cost a reply rather than a remade part.

Drawing review

Checks the model, drawing, revision, material, tolerances and finish for information that is missing or conflicting.

Manufacturability questions

Points out features that may be hard to make, inspect or finish as drawn, and suggests options for you to decide on.

Route proposal

Proposes the process, setups and finishing steps, and notes where tooling, a sample or a first article is needed.

A suggestion from engineering is a question, not a change. Your design changes only when you approve a revised drawing or model.

Placeholder for a photo (BH-P031-S03-I01)

Production

Once the route is agreed, the work moves to the production area that makes your part.

Production in Bohui's Own Factory

Bohui produces CNC machined, sheet metal, injection molded, 3D printed and vacuum cast parts in its own factory. In each area, the people who set up the work make your part to the released drawing and pass it on for inspection.

Bohui also offers aluminum and zinc alloy die casting; the manufacturing responsibilities for that service are established in the project scope.

CNC Machining

Planning the setups, fixtures and tool access for each part, then cutting it from metal or plastic stock.

Sheet Metal

Cutting, bending and joining sheet into brackets, panels and enclosures, in the order the finished shape needs.

Injection Molding

Setting up the mold, running the agreed resin and making parts that match the approved sample.

3D Printing

Preparing the build file, then printing and post-processing parts in the agreed process and material.

Vacuum Casting

Preparing the master, making the silicone mold, then casting and finishing parts in the agreed resin.

Placeholder for a photo (BH-P031-S04-I01)

Quality

Inspection then compares the parts with your drawing.

Quality Checks Parts Against Your Drawing

Quality inspection compares the parts with the drawing revision and the requirements agreed for the order, such as critical dimensions, appearance and any functional checks. What is checked, and which records come with the parts, is agreed with the order. If your approval process needs a particular measurement method or report format, send it with the drawing so it can be agreed before production starts.

Before production

Agreeing the critical features, how they are measured and which samples or first articles need your approval.

During and after production

Checking parts against the drawing and the approved sample, and setting aside parts that need review.

Records

Inspection records tied to the part number, revision and order, such as a first article or dimensional report where the order includes one.

Placeholder for a photo (BH-P031-S05-I01)

Project Flow

Seen together, these steps show where your project passes from one team to the next.

How Your Project Moves Between the Teams

Most projects follow the same path, though not every order needs every step. A repeat order of an approved part, for example, may need a shorter review.

1. Enquiry

You send the drawing, quantity and requirements to Jane, who checks that the information needed to quote is there.

2. Engineering review

Engineering reviews the drawing, raises questions and proposes the route, and Jane brings the questions to you.

3. Quotation and order

The quotation sets out the scope, terms and schedule. Your order confirms the revision and requirements to be made.

4. Production

The production area makes the parts, with samples or first articles where the order includes them.

5. Inspection and delivery

Quality checks the parts against the drawing, and they are then packed, labelled and shipped as agreed.

Reach Us

Knowing who does what makes it easier to ask a question that can be answered in one reply.

Reach the Right Person Through Jane

Send every question to Jane, including technical ones. She passes it to the engineer, production area or inspector who can answer it, and keeps the reply with the rest of your project.

To help get a complete answer, include:

  • The part number and drawing revision the question is about.
  • The feature, requirement or document concerned.
  • What you need to decide, and by when.
  • Photos, measurements or a marked-up drawing where they help.
  • Whether the question affects parts already in production.

Company details and direct channels are on the Contact page. If you are assessing Bohui as a supplier, Supplier Review explains how to plan that review.

Ready to Start the Conversation?

Send your project information through the quotation form, or contact me directly if you would like to clarify the scope first.

Placeholder for a contact photo of Jane

Jane

BOHUI PROTOTYPES LIMITED

I'm Jane, your contact at BOHUI PROTOTYPES LIMITED.

You can also reach me by email or on WhatsApp.

Jane

BOHUI PROTOTYPES LIMITED

  • Address: Xiaobian Street, Chang'an Town, Dongguan City, Guangdong Province, China

Request a Quote

Fields marked  are required.

Jane BOHUI PROTOTYPES LIMITED Privacy Policy