Skip to content
Request a Quote
Menu
Placeholder for a photo of molded plastic parts
Mold Development and Plastic Part Production

Custom Injection Molding and Mold Manufacturing in China

Bohui provides injection mold design and manufacturing together with plastic injection molding.

Our services include DFM analysis, mold optimization and two-color molding, supported by automated production and batch control. For your project, the mold investment and the finished plastic parts belong in the same discussion. Bring your part design, intended material and quantity plan into the scope for tooling, samples and production.

Services

Check which mold-development and plastic-part supply tasks your project needs, then compare the included work.

Mold Development and Molding Services

Mold design and manufacturing

Bohui undertakes injection mold design and manufacture as part of its plastic manufacturing services. The tooling scope connects the part design with the mold configuration, intended material and production requirement.

DFM and mold optimization

Design for manufacturing analysis helps identify issues before they become tool changes. Bohui provides DFM analysis and mold optimization for injection molding projects.

Plastic injection molding

Bohui manufactures injection molded plastic parts in its own factory. Automated production and batch control support the production service, while the part specification establishes the required material, dimensions and appearance.

Two-color molding

Two-color molding is available within Bohui's service scope. The proposed materials, interface and appearance need to be considered together for the particular part.

Placeholder for a photo of a mold or molded part

Project Status

The next decision depends on what is already in place. A new design, an existing mold and a repeat requirement each need a different starting brief.

Start with Your Part and Tool Status

Project stageInformation that moves the discussion forward
A design still being evaluatedThe intended function, current model or drawing, open design questions and what the next samples need to demonstrate.
A new mold requirementThe latest design revision, intended resin, first-order quantity, expected repeat demand and sample milestone.
An existing moldIts location, condition, dimensions, interfaces, available drawings and previous part or processing records.
A repeat production requirementThe released part reference, material, color, quantity and any change from the previous specification.

Keep the first order separate from expected annual or lifecycle demand. Those quantities inform different decisions about tooling investment and ongoing part supply.

An existing mold needs a compatibility and responsibility review before a production arrangement is agreed. Its previous use does not establish that it is ready for a different molding setup.

Resin and Color

Whichever stage you are at, the material remains part of the manufacturing requirement. Its grade, color and additives need to match the job the finished part will perform.

Define the Resin and Color Around the Part's Use

Specify the actual resin grade, reinforcement or additives, color reference and whether alternatives may be considered. A material family name alone leaves those choices open.

Function and environment

Describe the loads, temperature exposure, chemical contact and service conditions that matter. Highlight properties that decide whether the part can be used, rather than listing preferences without priorities.

Color and visible surfaces

Identify the color or physical reference, important viewing faces and required texture or gloss. A color match and a material match are separate requirements.

Two-color requirements

For a two-color part, identify the function of each region and how the interface will be used. The material combination, geometry and intended appearance need to be reviewed as one requirement.

For an application with specific flammability, chemical, food-contact or other requirements, identify the applicable evidence. Material selection and finished-product approval need to be addressed at the appropriate level.

Placeholder for a photo of resin and color references

DFM Review

Once the material and use are clear, the design can be reviewed for molding. This is where geometry, release from the tool and visible features come together.

DFM Analysis Before Tooling Decisions

Bohui provides DFM analysis and mold optimization to support the move from part design to tooling. Use the review to identify manufacturing questions, proposed changes and requirements you need to preserve.

The review basis should include the current design revision, material requirement and permitted changes. A proposed modification needs an accepted design reference before it becomes part of the tooling scope.

Discuss an Engineering Question

Mark surfaces where gate vestige, a parting line or ejection-related marks would be unacceptable, and identify areas where a location change may be considered. Keep the appearance reference and any proposed design change tied to the same revision.

Placeholder for an illustration of gate, parting line and critical surfaces

Four Review Points

Placeholder for a diagram of wall transitions and reinforcement

Wall transitions and reinforcement

Review where changes in thickness or intersecting features may affect the molded result.

Draft, undercuts and release

Identify how the part leaves the tool and which design regions can be adjusted.

  • Draft
  • Undercuts
  • Release

Critical fits and dimensions

Connect the features that locate, seal or assemble with their intended function and inspection reference.

Gates, parting lines and ejection marks

Identify important cosmetic and functional surfaces before settling their locations.

Mold Plan

Use the agreed design to define the mold configuration, responsibilities and investment separately from recurring part costs.

Plan the Mold and the Part Supply Together

The mold proposal should reflect the part geometry, resin, quantity plan and expected design changes. Tool material, cavity arrangement and relevant interfaces belong in that proposal, with their scope stated for the project.

ScopeWhat the quotation should identify
Mold developmentDesign and manufacturing work, proposed tool configuration and included deliverables.
Trials and changesSample scope, review requirements and how later revisions affect the work.
Plastic part supplyResin, color, quantity and the required delivered condition.
Completion and inspectionAny secondary operations, checks, reports and packaging included.
Manufacturing responsibilitiesWho performs the relevant operations and where external or customer-supplied items are involved.

Compare quotations for the same scope. A lower tool price and a lower part price do not necessarily describe the same production arrangement.

Before authorizing tool work, identify the design and material reference, proposed tool arrangement, agreed cosmetic locations and unresolved items. State who can accept each decision and what review follows; a general drawing approval should not silently settle an open material or surface question.

Trial Parts

A tooling proposal sets the plan; trial parts make the result available for review. Sample evaluation needs a defined basis before production can be released.

Review Trial Parts Before Production Release

Trial samples connect the mold and material choice with a physical part. The sample reference should identify the drawing revision, tool, actual resin and relevant processing or finishing condition.

  1. 01
    Review the result

    Assess critical dimensions, appearance and intended function separately. A cosmetic approval does not replace a fit check, and a successful fit check does not establish every service condition.

  2. 02
    Close the feedback

    Identify the feature, requirement and issue. Distinguish a correction to the agreed specification from a new design request, and define what needs another sample or measurement.

  3. 03
    Release the next stage

    The accepted part reference, remaining restrictions and authorized production scope should be clear. Tool modification, sample acceptance and permission to produce the order are separate decisions.

Placeholder for a detail photo of a trial sample

Photo to supply · BH-P005-S07-I02

A T1 sample is a review stage. Its name alone does not establish the contents of the sample package or approval for production.

Placeholder for a photo of a trial sample

Inspection

Clear feedback depends on clear evidence. The inspection scope should show which features were checked, in what condition and against which requirement.

Inspection That Refers to the Molded Part

Bohui's inspection resources include CMM and 2D measurement equipment, gauges, micrometers and calipers. The appropriate method depends on the part, feature and required checking condition.

Placeholder for a photo of measuring a molded part
Dimensional requirements

Identify the features that control fit and function, their datums and whether they apply after finishing or assembly. Where measurement timing or conditioning matters, include it in the acceptance requirement.

Appearance requirements

Use an identified reference for color, texture, gloss and permitted process marks. State the important viewing surfaces and comparison conditions.

Records and tests

First article inspection and dimensional reports are document options to define within the project. Additional functional tests need their own conditions, responsibilities and reporting scope.

Production

An accepted reference has value beyond the first samples. It also gives repeat production a consistent specification to work from.

Batch Production and Repeat Requirements

Bohui's injection molding service is supported by automated production and batch control. For each supply requirement, the technical reference brings together the released design, resin, color and acceptance criteria.

For the first production order, identify the accepted sample or specification, quantity, inspection requirements and delivered condition.

For repeat supply, carry forward the intended part and tool references. Highlight changes in material, color, finish, inspection or use before relying on a previous order as the specification.

For scheduling, separate sample review, production completion and arrival at the destination. Material availability, tool condition, order quantity and agreed completion work all belong in the schedule discussion.

Placeholder for a diagram of the references carried into repeat supply

Tooling Terms

Repeat supply also depends on the mold remaining available under clear terms. Ownership, storage, maintenance and future access should be addressed alongside the production plan.

Make the Tooling Arrangement Clear

A mold is part of an ongoing supply relationship. Its physical ownership, permitted use and associated design information should be addressed in the project agreement.

Before placing a tooling order, establish:

  • What tool and design information are included in the deliverables.
  • Where the tool will be held and how storage and inactivity are handled.
  • How maintenance, repair, design changes and replacement work are authorized and priced.
  • What is required if a tool is transferred or production ends.
  • Which samples, inspection records, packaging and delivery items are included in the order.

The quotation should also make the response to design or material changes clear. An agreed scope gives both the tool investment and later part orders a usable commercial reference.

Questions

These decisions can be developed around the information you already have. The following questions cover common points before an initial enquiry.

Questions Before You Start

Do you provide molds as well as molded plastic parts?

Yes. Bohui's services include injection mold design and manufacturing together with plastic injection molding. The tooling deliverables and manufacturing responsibilities should be stated in the scope for your project.

Can I enquire before the resin or tooling specification is complete?

Yes. Start with the part's intended use, current design and quantity plan. Identify the decisions that remain open so the discussion can focus on them.

Can I discuss an existing mold?

Include its condition, dimensions, interfaces and available records with the enquiry. Compatibility and the proposed production arrangement need to be assessed before a transfer or production order is agreed.

Does two-color molding mean any two materials can be combined?

The material pairing, interface, geometry and intended use need to be considered together. A two-color requirement should describe what each region contributes to the part.

Does a T1 sample mean the part is approved for production?

No. Trial samples are reviewed against the agreed dimensional, cosmetic and functional requirements. Production release needs its own accepted basis.

Your Enquiry

Start with the part and the decision you need to make next. Detailed tooling and inspection information can be added to the project brief where it is already available.

Discuss Your Mold and Injection Molding Project

Tell me what the part needs to do, whether you need a new mold or have an existing tool, and the quantities you are considering.

Placeholder for a contact photo of Jane

Jane

BOHUI PROTOTYPES LIMITED

Include the model or drawing revision, intended resin and color, critical dimensions, visible surfaces, sample milestone and delivery destination where known. If a requirement is still open, say so in your message.

Prefer to contact me directly? Reach me by email or WhatsApp. You can describe the project first and discuss an appropriate way to share detailed files.

Jane

BOHUI PROTOTYPES LIMITED

  • Address: Xiaobian Street, Chang'an Town, Dongguan City, Guangdong Province, China

Request a Quote

Fields marked  are required.

Jane BOHUI PROTOTYPES LIMITED Privacy Policy