Skip to content
Request a Quote
Menu
Placeholder for a photo (BH-P021-S01-I01)
Appearance, Interfaces and Delivered Condition

Surface Finishes for Custom Parts

Surface treatment is part of Bohui's manufacturing offer.

Our sheet metal surface-treatment range includes spraying, electroplating and anodizing, with the selected treatment defined around the material and the finished component. For a custom part, the surface can affect its appearance, fit and use. A complete requirement identifies the visible faces, functional interfaces and condition in which the part will be delivered and accepted.

Treatments

Check the treatment against your substrate and the result you need for the component.

Surface Treatments in Our Sheet Metal Range

Placeholder for a photo (BH-P021-S02-I01)

Spraying

A coating option within Bohui's sheet metal surface-treatment range. The coating specification, color, texture and covered areas define the requested result, together with any surfaces that need protection from the treatment.

Placeholder for a photo (BH-P021-S02-I02)

Electroplating

A finishing option for suitable material and coating combinations. The substrate, specified coating system and any thickness or masking requirement belong to the finished-part specification.

Placeholder for a photo (BH-P021-S02-I03)

Anodizing

A treatment option for compatible materials within the sheet metal project scope. The material specification, appearance reference and requirements for functional surfaces help establish the treatment and acceptance discussion.

These treatment names describe the published range. The specific material, treatment specification and completed-part requirement establish the combination for an individual order.

Route

Consider the surface left by manufacturing before you specify the finish you need.

Start with the Manufacturing Route

The required finish belongs to the actual part, material and process. A surface specification can address the appearance left by manufacturing, a requested additional treatment or both.

Part routeSurface requirements to connect to the project
CNC machiningMachined surfaces, contact areas, edge condition and any requested treatment after machining
Sheet metal fabricationSheet condition, formed faces, visible joints and the agreed surface treatment
3D printingThe selected process and material, cleanup, important visible faces and any requested additional finish
Part routeSurface requirements to connect to the project
Injection moldingThe molded surface, specified appearance and the relationship between the part requirement and mold design
Vacuum castingThe master, actual casting resin and required finished appearance, including any agreed clear or soft-touch option
Die castingThe casting surface, functional interfaces and any separately defined finishing or secondary-work requirement

CNC machining · Sheet metal fabrication · 3D printing · Injection molding · Vacuum casting · Die casting

Use an appearance reference that represents the same material and finished condition as your part. A treatment specified for one substrate does not establish the scope for another.

Functional Features

Appearance is one part of the finished result. Some surfaces must also locate, seal, fasten or make contact with another component.

Protect the Features That Make the Part Work

A finish specification needs to preserve the interfaces that control the component's function. Coating thickness and the condition of treated surfaces can affect fit, so the drawing should identify how those areas are to be handled.

Functional areaRequirement to make clear
Threads and fastening featuresTreatment allowance, masking and the finished condition required for assembly
Bores, locating faces and bearing interfacesThe dimension and reference condition after any agreed treatment
Sealing and contact facesSurface requirements and areas that must remain protected or untreated
Electrical contact areasThe intended contact condition and any treatment restrictions

Where a dimension applies after finishing, the acceptance requirement should say so. This keeps the manufacturing and checking discussion focused on the same delivered component.

Appearance

Once the functional areas are identified, the appearance target can be defined around the surfaces the user will see. A clear reference makes that target easier to assess.

Define the Appearance You Want to Receive

The appearance requirement is strongest when it identifies the important faces and the reference for judging them. It can then distinguish the presentation surfaces from areas that are hidden in the assembled product.

Color and texture: identify the agreed reference, the surface to which it applies and any requirement to match adjoining components.

Visible areas: show the viewing faces and the locations where marks, joints or treatment boundaries matter to the product's appearance.

Optical appearance: where relevant to the selected material and process, describe the intended clarity or translucency and the condition in which it will be assessed.

Review conditions: record any agreed sample, viewing arrangement or acceptance reference that is important to the project.

A photograph can communicate the intended effect. An agreed physical reference or documented sample provides a more specific basis when a close appearance match is important.

Placeholder for a photo (BH-P021-S05-I01)

Inspection

The agreed appearance and functional requirements lead to the final checks. Those checks need to relate to the completed part and its delivery condition.

Inspect the Finished Condition

Bohui's inspection resources include CMM and 2D measuring equipment, gauges, micrometers and calipers. For a finished component, the project identifies the dimensions and appearance requirements that need checking after the agreed treatment.

The inspection scope should connect the part revision, finished state and acceptance reference. Dimensional reporting and appearance review answer different questions, even when they concern the same surface.

Packaging and surface-protection needs also belong in the delivery discussion. Visible faces, contact surfaces and parts that may touch one another during shipment can require specific handling or protection arrangements within the agreed scope.

Placeholder for a photo (BH-P021-S06-I01)

Questions

Clear treatment, appearance and inspection requirements make the project easier to define. These answers address several common questions about finishing scope.

Surface Finish Questions

Are the Same Finishes Suitable for Every Material?

The treatment needs to match the substrate and the finished-part requirement. Bohui's published sheet metal range includes spraying, electroplating and anodizing; the applicable combination is established around the actual material and project.

Should My Drawing State Dimensions Before or After Finishing?

It should identify the condition that applies to each critical requirement. If a fit or contact feature must meet its dimension after treatment, that condition belongs in the acceptance specification.

Can I Use a Photograph as a Color or Appearance Reference?

Use a photograph to explain your target appearance. If you need a close match, also agree on a reference sample or specification and the conditions for judging the result.

Is Every Possible Secondary Operation Included with a Finish Request?

The quotation scope defines what is included. Masking, additional machining, hardware, assembly, testing and special protection requirements need to be identified separately where they form part of the requested delivery.

Can I Discuss a Finish Before the Part Design Is Final?

Yes. Start with the material, intended use and important visible or functional areas. The final specification can then be tied to the released part revision and agreed delivery scope.

Your Enquiry

Bring the part requirement and the surface result you have in mind. A drawing, reference image or sample description can help make that result concrete.

Discuss the Finish as Part of Your Custom Part

Include the part model or drawing, material and quantity, together with the required surface treatment or appearance reference.

Placeholder for a contact photo of Jane

Jane

BOHUI PROTOTYPES LIMITED

Mark the visible faces and the interfaces that must retain a particular fit or contact condition.

For a direct conversation, contact me on WhatsApp or by email.

Jane

BOHUI PROTOTYPES LIMITED

  • Address: Xiaobian Street, Chang'an Town, Dongguan City, Guangdong Province, China

Request a Quote

Fields marked  are required.

Jane BOHUI PROTOTYPES LIMITED Privacy Policy