Aluminum and Zinc Alloy Die Casting Services
Bohui offers aluminum and zinc alloy die casting for batch production, with services spanning mold design through production delivery.
Define the metal part you need to receive: its alloy, geometry, critical interfaces and finished condition. Bring those requirements together with your quantity plan to discuss the tooling and production scope.
Requirements
Batch production begins with a clear definition of the supplied part. Establish the condition in which it needs to arrive before comparing tooling or piece prices.
Define the Part and the Production Requirement
Bohui's die casting service covers aluminum and zinc alloy parts for batch supply. Include the work your part needs before it can enter your assembly or application.
Part definition
Provide the model or drawing reference, alloy requirement and important dimensions. Identify features that locate, seal, fasten or connect with another component.
Delivered condition
State whether the requirement is for cast parts or includes further machining, surface treatment, inspection or assembly. Each requested operation should be identified in the proposed supply scope.
Quantity plan
Separate the first order from expected repeat demand and any staged delivery. That distinction helps frame the tooling investment and recurring part requirement.

Alloys
The delivered condition and use help define the material requirement. Start with the specified alloy or the properties that the selection needs to satisfy.
Aluminum and Zinc Alloy Requirements
Aluminum alloys and zinc alloys are the two material directions within Bohui's die casting offering. The actual alloy specification should be connected to the part's performance, geometry and completion requirements.
| Material input | What it establishes |
|---|---|
| Alloy grade and standard | The material identity required for the casting. |
| Intended use | Relevant loads, temperature, exposure and functional requirements. |
| Finished condition | Machining, coating or other requested work that affects the supplied part. |
| Material documents | The identification or verification records needed for your approval. |
| Alternative materials | Whether another alloy may be proposed and who can accept the change. |
If a grade has not been selected, explain which properties are essential. Material choice should be considered with the tool, part design and intended supply conditions.
Mold Design
With the material requirement established, the mold design can be discussed around the part. Identify the features you need to preserve and any design changes you can consider.
Connect Mold Design with the Finished Part
Bohui's die casting offering spans mold design and batch delivery. The tooling discussion should bring together the casting geometry, material, production requirement and features that must remain unchanged.
Geometry and release — Identify wall transitions, ribs, draft and features that affect how the part is formed and released.
Parting, gates and ejection areas — Mark visible faces, functional interfaces and locations where a process mark would affect acceptance.
Machining references — Identify datums and surfaces needed for any subsequent machining, including areas where stock or access is required.
Tooling scope — Establish the proposed configuration, responsibilities, deliverables and treatment of later design changes.
The accepted drawing revision and permitted changes should remain clear before tooling work proceeds.

Trial Parts
Tooling creates the route to a repeatable part. Trial parts provide the physical basis for checking whether the proposed route meets the agreed requirement.
Review Trial Parts Against a Defined Requirement
A trial part needs an identifiable reference: drawing revision, alloy, tool and the condition in which it is being evaluated. If machining or finishing is required for the final part, state whether the sample includes that work.
Dimensional review checks the features and datum relationships that control fit.
Appearance review assesses the named surfaces and accepted reference.
Functional review addresses the tests and operating conditions relevant to the application.
Feedback should identify the affected feature, the requirement and the proposed next step. Corrections to an agreed specification and new design requests need to be distinguished when discussing tool work, further samples, cost and timing.
Production release should identify the accepted reference and the scope authorized for the order.

Secondary Work
The review condition must match the intended delivery. Any machining, finishing or additional features therefore belong in the part definition from the start.
Make Secondary Operations Part of the Supply Scope
The casting and the finished component may have different requirements. List the additional work needed for your part so the quotation can identify what is included and who is responsible.
Machined interfaces
Specify holes, threads, locating faces, bearing fits and sealing surfaces that need a defined final condition. Keep their datums and inspection requirements associated with the finished part.
Surface and appearance
Identify the visible areas, required texture or coating, color reference and surfaces where treatment must be restricted. The proposed finish needs to suit the actual alloy and the part's use.
Completion work
Include trimming, cleaning, hardware or assembly requirements where relevant. Distinguish the requested work from the operations accepted in the quotation.

Inspection
Completion work can affect both dimensions and use. The inspection plan should assess the state that matters for your assembly or application.
Match Inspection to the Critical Features
The inspection requirement should identify the part revision, alloy, finished condition and features that decide acceptance. Material identity, dimensions, appearance and functional performance each answer a different question.
For fit-sensitive features, specify the datum, dimension and mating condition, including any checks after machining or finishing.
For visible surfaces, identify the reference and comparison conditions, with the important areas clearly marked.
For sealing or pressure-related applications, state the medium, operating conditions, allowable leakage and required test. Internal porosity and machining can affect the relevant surfaces, so these requirements need to enter the project discussion early.
The agreed scope should distinguish routine dimensional checks from any additional examination or performance test, together with the records required.
Review Quality and Inspection Topics
If testing or further examination is requested, define who performs it, the part condition and the reporting scope before it is included in the order. No particular leak test, radiographic examination or pressure capability should be assumed from the die casting service name.
Tooling Terms
An accepted part reference supports the first order and later batches. Tool availability and changes to the specification are the next points to settle for repeat supply.
Plan the Tooling Relationship and Repeat Orders
Batch production benefits from a stable part reference and a clear tooling arrangement. A repeat requirement should carry forward the approved drawing, alloy, completion work and inspection basis, with changes identified separately.
The tooling agreement should address ownership and use, included design information, storage, maintenance, repairs and any transfer or end-of-production arrangement.
For a new order, consider the condition and availability of the tool alongside the quantity and requested schedule. Where the design, alloy or finish changes, the effect on tooling, samples and inspection needs to be reviewed within the new scope.
Keep the first batch and expected later demand visible when discussing the production plan.
Quote Scope
The tool and repeat-order arrangements help define the total investment. A complete quotation also makes the finished-part and delivery boundaries clear.
Compare the Full Die Casting Requirement
Tooling investment and recurring part supply should be visible as separate elements. Your quotation should identify the work and assumptions behind each.
| Quotation element | Scope to establish |
|---|---|
| Tooling | Design and manufacturing responsibilities, configuration, trials and included deliverables. |
| Cast parts | Alloy, quantity, drawing revision and production requirements. |
| Further operations | Machining, finishing or other completion work accepted for the project. |
| Acceptance | Samples, inspection, testing and requested records. |
| Delivery | Packaging, identification, destination and the agreed transport boundary. |
For timing, distinguish tool development, sample review, production completion and transport. A target arrival date needs to account for the decisions and work preceding shipment.
Questions
An initial enquiry does not need to settle every detail. It should make the part, material and quantity direction clear enough to identify the next decision.
Die Casting Questions Before You Enquire
Which materials are included in the service offering?
Bohui offers aluminum alloy and zinc alloy die casting. Include the required grade or standard where known, together with the part's intended use and any material documentation requirements.
Is this the same service as vacuum casting?
This page covers metal die casting. Bohui's vacuum casting service concerns small-batch plastic replication using a master pattern and silicone tooling.
Can the enquiry include machining or surface finishing?
Yes. List the additional work your finished part requires so feasibility, responsibilities and inclusion can be addressed in the project quotation.
What if the part has a sealing requirement?
Identify the relevant surfaces, medium, operating conditions, allowable leakage and required test. These details help define the manufacturing and inspection scope before tooling and production are agreed.
What information is most useful for a first quotation?
Start with the drawing or model, alloy, initial and repeat quantities, critical features and delivered condition. Add the target milestone and destination, and identify any decisions still open.
Your Enquiry
Bring those points together in a short project description. The enquiry can then focus on the part you need and the scope of its supply.
Discuss Your Aluminum or Zinc Die Casting Project
Share the part design, alloy requirement, quantities and the condition in which you need the components delivered.
Jane
BOHUI PROTOTYPES LIMITED
Highlight critical fits, visible surfaces, sealing requirements and any existing tooling information.
For direct contact, speak with me by email or WhatsApp. You can start with a project description before arranging how to share detailed files.
Jane
BOHUI PROTOTYPES LIMITED
- Address: Xiaobian Street, Chang'an Town, Dongguan City, Guangdong Province, China
Request a Quote
Fields marked are required.

