Skip to content
Request a Quote
Menu
Placeholder for a photo (BH-P016-S01-I01)

Quality Control for Custom Manufactured Parts

Bohui's inspection capabilities include coordinate measuring machines, 2D measuring instruments, XRF analyzers, gauges, micrometers and calipers in the equipment range.

First article inspection and dimensional measurement reports are available documentation options. Define the scope around your supplied part: its drawing revision, material, critical features and delivered condition. This page explains how to connect the available inspection equipment and documentation to the requirements that determine acceptance of your parts.

Inspection Tools

Match your inspection requirements to the methods and records you need.

Inspection Tools for Different Questions

Our equipment range provides several ways to examine a part. The method should be selected for the actual feature or material question, together with the required reference, measurement conditions and reporting scope.

Equipment in our rangeRelevant inspection focus
Coordinate measuring machinesDimensional features and their geometric relationships
2D measuring instrumentsFeatures suited to the applicable two-dimensional measurement method
XRF analyzersMaterial composition information within the method's applicable scope
GaugesChecks against a specified size, form or fit requirement
Micrometers and calipersSuitable accessible dimensions within the instrument and setup range

An instrument name alone does not establish a tolerance for every part. Access, geometry, setup and the condition of the part all influence which check is appropriate. Equipment accuracy and finished-part acceptance should be treated as separate requirements.

For a supplier review, identify any requirement for instrument identification, calibration status or measurement traceability. The relevant record should refer to the method and instrument actually used; this information is a project evidence requirement, not a tolerance inferred from the equipment name.

By Process

The manufacturing route also changes which features and part conditions deserve attention first.

Inspection Focus by Manufacturing Process

The same nominal dimension can describe different stages of a part. A flat sheet, a formed component and a coated assembly are different inspection objects. A prototype and a released production part can also have different acceptance purposes.

Manufacturing routeRequirements to define for the supplied part
CNC machiningCritical dimensions, datums, mating features and the state after any specified finishing
Sheet metal fabricationFormed geometry, interfaces, joining requirements and the completed surface condition
Injection moldingThe specified resin and revision, sample requirements, dimensions and appearance criteria
Manufacturing routeRequirements to define for the supplied part
3D printingActual process and material, relevant build or completion conditions, and the features needed for the intended evaluation
Vacuum castingThe master and sample reference, casting material, batch dimensions and appearance requirements
Die castingSpecified alloy and casting condition, critical interfaces, completion work and required checks

The inspection plan should identify the actual part and features to be assessed. A requested assembly trial or functional test also needs its own method and acceptance criterion.

First Article

Once the inspection object is clear, the record can show exactly what was checked and on what basis.

First Article and Dimensional Documentation

First article inspection and dimensional measurement reports are available within a defined project documentation scope. The report requirement should identify the part, the features to be checked and the information needed for your acceptance process.

Ask for the result to be connected to:

  • The part reference and applicable drawing or model revision.
  • The features, datums and requirements included in the check.
  • The relevant material and delivered condition.
  • The measurement or assessment method and reported result.
  • The sample, quantity or batch coverage required for the project.

Specify reporting needs when defining the order scope. A report covering selected features is different from individual results for every feature on every part, so the required coverage should be explicit.

Placeholder for a photo (BH-P016-S04-I01)

Material Evidence

Dimensional records answer geometric questions; material and test documentation need their own basis.

Material Information and Test Requirements

Material identity, composition information and functional performance answer different questions. The exact material designation and the basis of any document matter, particularly when an alternative grade or a different manufacturing route is being considered.

If your project requires RoHS-related documentation, a specific material document or functional testing, include the required object, test basis and reporting expectation in the inquiry. These requirements need a defined scope; they should not be inferred from a material family name or a photograph of inspection equipment.

A material data sheet describes the material and conditions stated in that document. A result for the actual supplied part requires the corresponding check or test. Keeping those two types of information clear helps you judge whether the evidence answers your project question.

Placeholder for a photo (BH-P016-S05-I01)

Samples

The evidence also needs to remain connected to the sample and design revision being evaluated.

Samples, Revisions and Production Decisions

Decide whether your sample needs to support an appearance review, a fit check or a defined test. Acceptance for one purpose does not automatically establish acceptance for every later use or manufacturing stage.

For an injection molding project, the tool, resin, trial sample and production requirement belong to the same discussion. For vacuum casting, the master, accepted reference and replicated batch need to be considered together. A printing prototype should be evaluated against the task it was made to perform.

Changes to geometry, material or finish can change the basis of an earlier result. The current revision, the remaining open items and the approval needed for the next stage should therefore be clear in the project record.

Placeholder for a photo (BH-P016-S06-I01)

Delivered State

The final reference for inspection is the condition in which the part will be supplied.

Inspect the Delivered State

Finishing can affect the dimensions, surfaces and interfaces that matter to a part. A check made before a specified treatment may answer a different question from a check on the delivered item.

For functional surfaces, identify the required condition of mating areas, threads, contact points and any regions where treatment is excluded. For appearance, define the visible areas and the reference used to judge color, texture or other agreed visual requirements.

The requirement should also distinguish the part itself from an assembled system or a requested fit trial. Mating components, test conditions and the scope of any additional check need to be identified where they form part of acceptance.

Placeholder for a photo (BH-P016-S07-I01)

Your Enquiry

These details turn a general quality request into a specific inspection and documentation requirement for your project.

Discuss the Evidence Your Project Needs

Share the part drawing or description, the critical requirements and any inspection or reporting specification already in place.

Placeholder for a contact photo of Jane

Jane

BOHUI PROTOTYPES LIMITED

If a check must refer to a finished surface, assembly condition or defined test, make that context visible with the requirement. I'm your contact for starting the discussion.

For an existing order, include the order or part reference and the issue you need to review so the information can be considered in its proper context. If the concern relates to parts already received, include the order reference, affected revision, quantity and observations. Photographs and measurements help distinguish the reported issue from the original acceptance requirement without assuming a cause before review.

Jane

BOHUI PROTOTYPES LIMITED

  • Address: Xiaobian Street, Chang'an Town, Dongguan City, Guangdong Province, China

Request a Quote

Fields marked  are required.

Jane Contact Jane Privacy Policy