Rapid Prototyping Services for Custom Parts
Choose a prototype route by what the part has to prove: its appearance, its fit, its function or the production process.
Bohui produces CNC machined, 3D printed, vacuum cast, sheet metal and injection molded parts in its own factory, and also offers aluminum and zinc alloy die casting. Send the model and the question the prototype must answer. The route, material and finish can then be compared against that purpose, not against unit price alone.
Prototype Purpose
Before choosing a process, decide what the prototype needs to show you.
Decide What the Prototype Must Prove
A prototype is a test. A part that looks right may not fit, and a part that fits may not survive the test it was made for, so start from what you need to learn.
Most prototypes serve more than one purpose. Rank them, and choose the route for the one that decides your next step.
Shape, color and surface for design reviews, photography or presentations. The finish on visible faces counts for more than the material.
How the part assembles with mating parts, fasteners and housings. Critical dimensions count for more than appearance.
How the part behaves under load, heat, movement or contact. Material and process need to be close to production, or the result may not carry over.
Whether the design can be made by the intended production process at the required quality. This usually needs that process and its tooling.

Six Routes
With the purposes ranked, compare the routes that can make the part.
Six Routes for Prototype Parts
These are general starting points; the supplier should confirm the right route for your design.
Cuts the part from solid metal or plastic stock, often in the same grade as production. Suited to functional and fit testing where cutting tools can reach every feature.
Builds the part layer by layer without tooling, so a revised design can be printed again from a new file. Suited to early models, complex internal shapes and frequent changes.
Copies a master pattern in a silicone mold to make several plastic parts with a molded-looking surface, in a casting resin chosen to approximate the target material.
Cuts, bends and joins sheet into brackets, panels and enclosures, often without part-specific forming tools, so fit and formed geometry can be checked early.
Makes plastic parts in the production resin from a mold. Because a tool is needed, it suits late validation of a stable design rather than early design changes.
Makes aluminum or zinc alloy parts from a die. Early metal prototypes are often machined until the design is ready for a die.
Choose a Route
Several routes may suit the same part. Geometry, material and quantity narrow the choice.
Choose by Geometry, Material and Quantity
Use geometry, material and quantity as three filters, then confirm the route against your actual design.
| If your prototype needs | Routes to compare | Check with the supplier |
|---|---|---|
| Production-grade metal or plastic for testing | CNC machining | Tool access, number of setups and the machined surface |
| Complex internal shapes or fast design changes | 3D printing | Printing process, material properties and surface finish |
| Several identical plastic parts with a molded look | Vacuum casting | Master quality, casting resin and how many parts one mold can make |
| Formed brackets, panels or enclosures | Sheet metal fabrication | Sheet material and thickness, bend features and joining |
| Production resin or alloy from the final process | Injection molding or die casting | Tool scope, sample approval and design stability |
Finishing
The route sets what the part is made from. The finish decides how close it looks and feels to the final product.
Finish the Prototype Like the Final Part
A prototype shown to customers or tested for wear should carry the production finish, or one chosen to imitate it. Finishes change dimensions, feel and appearance, so leaving them until production can bring surprises later.
Say which surfaces are cosmetic and which must stay bare for contact or fit.
Appearance models
Painting, texturing or polishing on visible faces, matched to a color or surface reference.
Functional parts
The production finish where it affects friction, corrosion, electrical contact or fit, with masked areas marked on the drawing.
Test limits
Note where a prototype finish only imitates the final one, so the test result is not read as approval of the production finish.

Checking
A finished prototype still needs to be checked against the question it was made to answer.
Check the Prototype Against Its Purpose
Decide how the prototype will be checked before it is made. A dimensional check confirms the part matches the drawing. A fit check confirms it works with the parts around it. A functional test confirms it survives its intended use. Each needs a different method and a different record.
Agree these points before the parts are made:
- Critical dimensions and the datums they are measured from.
- Mating parts or fixtures needed for fit checks.
- Test conditions and pass criteria for functional tests.
- The report you need with the parts.

Next Stage
A prototype that passes its checks raises the next question: how to make the next parts.
Move from Prototype to the Next Stage
The step after a prototype is rarely a straight jump to mass production. Many projects first need a small batch for pilot builds, user trials or compliance testing.
If the production route differs from the prototype route, review which results still apply. A machined part does not show how a molded part will fill. Treat a change of route as a new manufacturing decision, and confirm the material, design rules and checks again.
Another prototype round
Revise the design and repeat the route while the geometry is still moving.
A small batch
Use vacuum casting, CNC machining or 3D printing to supply parts before production tooling is ordered.
Production tooling
Order a mold or die once the design is stable and the expected quantity justifies the tool.

What to Send
Whichever route fits, the quotation can only be as precise as the information you send with it.
What to Send with a Prototype Enquiry
Send the purpose along with the model. Mark what is fixed and what is still open, so the supplier can suggest a route instead of guessing.
Include where you can:
- A 3D model and, where tolerances or threads count, a drawing.
- What the prototype must prove: appearance, fit, function or process.
- The material, or the properties the test needs.
- The finish, and the surfaces that must look or work like the final part.
- The number of parts, and whether more rounds are expected.
- Your target milestone and the planned production route, if known.
Questions
A few practical points come up on most prototype projects.
Rapid Prototyping Questions
Which route is fastest for a prototype?
It depends on the part. Routes without tooling, such as 3D printing and CNC machining, avoid the time needed to make a mold, while vacuum casting needs a master and a silicone mold first. Give your target milestone and ask the supplier to confirm the plan against it.
Can the prototype be made in the production material?
In many cases. CNC machining and sheet metal can often use production materials. Printed and cast parts use materials chosen to approximate the target, so compare their data with the test. Molded and die cast prototypes use the production material but need a tool.
How many prototypes should I order?
Order enough for every test and review planned for this round, plus spares. For several identical parts, ask whether vacuum casting or a small machined batch suits better.
Does a prototype that passes testing mean production parts will pass?
Not automatically. A result carries over only when the material, process, finish and test conditions match production. Record those conditions, and repeat the checks that a change of route affects.
What do I need to start a prototype enquiry?
A 3D model and a short note on what the prototype must prove are enough to begin. Add the material, finish, quantity and target milestone where you know them, then Request a Prototype Quote.
Send the Part Requirement, Not Just a Process Name
Share your drawing or model, intended use, material requirement and quantity plan.
Jane
BOHUI PROTOTYPES LIMITED
I'm Jane, your contact at BOHUI PROTOTYPES LIMITED.
If you are comparing routes, tell me what would make one option preferable for your project.
Jane
BOHUI PROTOTYPES LIMITED
- Address: Xiaobian Street, Chang'an Town, Dongguan City, Guangdong Province, China
Request a Quote
Fields marked are required.


