Low-Volume and Bridge Production
Bridge production supplies small batches of parts between the prototype and production tooling.
Bohui produces vacuum cast, CNC machined, 3D printed and sheet metal parts in its own factory, and the route for each batch is chosen around the part, its material and its finish. Use small batches for pilot builds, market tests, first sales or spare parts, and plan how the design will move to an injection mold or die casting die once demand is clear.
When to Use
A small batch is worth planning when it answers a question that production tooling cannot answer yet.
When Small-Batch Production Makes Sense
Production tooling commits you to a design. Small-batch routes let you build, sell or test parts while the design, demand or supply plan is still being confirmed.
The price of each part is usually higher than with production tooling, but the total cost of the project can be lower when quantities are small or the design may still change.
Build parts with silicone molds or without tooling while the last design changes are settled, so the mold or die is made once.
Supply parts for assembly trials, line setup and early compliance testing in a representative material and finish.
Make enough units for user trials, exhibitions or a first sales run before the forecast justifies a production tool.
Make small reorders of parts whose demand no longer supports a production tool, or whose original tool is no longer available.

Batch Routes
The route for a small batch depends on the part's material, its geometry and how close it must be to production.
Routes for Small Batches
Each route balances tooling, material choice and batch consistency differently. Confirm the route against your part and quantity before you commit to it.
Silicone molds made from a master produce batches of plastic parts with a production-like surface. Casting resins are chosen to approximate the target material, and a larger batch may need more than one mold.
Machines parts from metal or plastic stock in the production grade, with fixtures but no part-specific mold. Programs and fixtures can be reused for later batches when the design does not change.
Builds batches without tooling, which suits complex shapes and designs that may still change. Check that the printed material, surface and part-to-part consistency meet the batch requirements.
Cuts and bends brackets, panels and enclosures from sheet, often without part-specific forming tools. Flat patterns and bend programs can be reused for later batches.
Where a part would be better served by a dedicated tool, the tooling options are discussed for the individual project.
Vacuum Casting · CNC Machining · 3D Printing · Sheet Metal Fabrication
Consistency
Small batches are often made more than once, so consistency between batches needs a plan from the first one.
Keep Batches Consistent
A bridge only works if the second batch matches the first. Consistency depends on a fixed reference, controlled changes and records that let you compare one batch with the next.
Master or reference sample
Keep an approved part, or the master pattern for cast parts, as the physical reference for appearance, color and fit. Agree who keeps it and how it is identified.
Revision control
Tie each batch to a drawing and model revision. A change to design, material or finish gets a new revision and is reviewed before the batch is made.
Inspection records
Record the agreed checks for each batch with the revision, material and process used, so a later batch can be compared with an approved one.

Material and Finish
Material and finish decide how far the small-batch parts can stand in for production parts.
Material and Finish for Small Batches
A small-batch part often uses a different material or finish from the eventual production part. Decide which differences are acceptable for the use of this batch, and write them down. Machined and sheet metal parts can often use the production grade; cast and printed parts use materials chosen to approximate it, so check their data against the batch's use.
Finishes need the same care. A painted cast part can come close to the color of a molded part while its surface hardness and wear differ. Decide whether the batch finish is for appearance only or must perform like the production finish.
| Decision | Questions to settle |
|---|---|
| Material | Production grade or substitute, and which properties must match |
| Color and texture | The reference sample, and whether the color comes from the material or a coating |
| Finish | Appearance only, or required for corrosion, wear or contact |
| Use of the batch | Testing, display, sale or service, and what each use must prove |
Move to Tooling
Once demand and design settle, the small-batch route can give way to production tooling.
Plan the Move to Production Tooling
There is no single quantity at which production tooling becomes the better choice. It depends on the tool cost, the part price on each route, the expected demand and how likely the design is to change. Compare the total cost of the next orders on both routes, not the unit price alone.
Prepare the design for the production process before the tool is ordered: a part designed for machining or casting may need draft, more even walls or adjusted radii for injection molding or die casting. Bohui also provides injection molding and aluminum or zinc alloy die casting, so both routes can be reviewed against the same part.
Signs that the design is ready for tooling:
- The design has passed fit and function testing.
- Demand is steady enough to plan repeat orders.
- The part has been reviewed against the production process's design rules.
- Production material, color and finish are decided.
- The tooling scope, samples and approval steps are agreed.

Repeat Batches
Until then, and sometimes after, small batches are reordered. A clear reference keeps each reorder simple.
Plan Repeat Batches
A repeat batch should be the same part as the last approved one unless you say otherwise. Reference the drawing revision, material, finish and approved sample in each reorder, and list every change, however small.
For cast parts, ask about the condition of the master and silicone molds before the reorder, as a new mold may be needed. For machined and sheet metal parts, reusing programs and fixtures depends on the design staying the same.
What stays the same
The revision, material, finish and the checks used for the approved batch.
What changes
Quantity, delivery, packaging or any design or specification update, stated in the order.
What is checked again
Any batch made from a new mold, a revised drawing or a different material lot.
Questions
The same questions come up on most low-volume projects.
Low-Volume Manufacturing Questions
What is bridge production?
Bridge production supplies parts between the prototype and production tooling, so you can build, test or sell before the production tool is ready or justified. The parts are made by routes with little or no dedicated tooling, such as vacuum casting, CNC machining, 3D printing or sheet metal fabrication.
How many parts count as low volume?
There is no fixed number. It depends on the part, the route and the material; a quantity that is small for one design may be large for another. Share your batch size and expected repeats, and ask the supplier to confirm which route fits.
Can low-volume parts be used as end-use parts?
They can, if the material, finish and inspection meet the requirements of the application. Define the loads, environment and checks the parts must pass, and confirm that the chosen route and material support them.
Will parts from different routes match each other?
Not automatically. Cast, machined and molded parts of the same design can differ in material, surface and dimensions. If they will be used together or compared, define which features must match and check them.
Can I start with a small batch and move to tooling later?
Yes. Plan the move early: keep the design under revision control, review it for the production process, and ask for tooling and part prices to be compared with the small-batch route. When you are ready, Request a Low-Volume Quote with your model, material, quantity and planned use.
Send the Part Requirement, Not Just a Process Name
Share your drawing or model, intended use, material requirement and quantity plan.
Jane
BOHUI PROTOTYPES LIMITED
I'm Jane, your contact at BOHUI PROTOTYPES LIMITED.
If you are comparing routes, tell me what would make one option preferable for your project.
Jane
BOHUI PROTOTYPES LIMITED
- Address: Xiaobian Street, Chang'an Town, Dongguan City, Guangdong Province, China
Request a Quote
Fields marked are required.


